5pcs Diamond Sharpening Stones with Extra Fine/Coarse Plate for Various Knives & Tool EVA backing

This diamond sharpening stone set includes fourteen diamond sharpeningplates, with grits ranging from 80 to 3000, that can be used to sharpen a variety of knives and tools. The coarse plates (80 to 240 grit) are ideal for quickly repairing severely damaged blades or significantly altering the edge angle. The mid-grit stones (400 to 1200 grit) are used for sharpening most knives and tools and for refining a dull edge. The fine grit stones(1500 to 3000 grit) are ideal for polishing the edge and achieving a razor-sharp finish. The stones are made from durable diamond material that is resistant to wear and tear, and they come with a non-slip silicone base to keep them in place while you are sharpening.

Features

• Fourteen diamond sharpening plates: 80 grit, 120 grit, 150 grit, 180 grit, 240 grit, 400 grit, 600 grit, 800 grit, 1000 grit, 1200 grit, 1500 grit, 2000 grit, 2500 grit, and 3000 grit
• Coarse plates (80 to 240 grit) for repairing severely damaged blades or significantly altering the edge angle
• Mid-grit stones (400 to 1200 grit) for sharpening most knives and tools and for refining a dull edge
• Fine grit stones (1500 to 3000 grit) for polishing the edge and achieving a razor-sharp finish
• Durable diamond material
• Non-slip silicone base

Benefits

• Sharpen a variety of knives and tools
• Repair severely damaged blades or significantly alter the edge angle
• Refine a dull edge
• Polish the edge and achieve a razor-sharp finish
• Durable and long-lasting
• Easy to use

How to Use

1. Soak the sharpening stone in water for 5-10 minutes before use.
2. Select the appropriate grit stone based on the condition of your blade. Refer to the following as a general guide:
   • Severely damaged blades or significantly altering the edge angle - 80 to 240 grit
   • sharpening most knives and tools and for refining a dull edge - 400 to 1200 grit
   • Polishing the edge and achieving a razor-sharp finish - 1500 to 3000 grit
3. Place the sharpening stone on a flat surface.
4. Hold the knife at a 20-degree angle to the stone and slide it back and forth across the stone, applying light pressure.
5. Repeat on the other side of the blade.
6. Progress through the grits from coarse to fine (as needed), using lighter pressure as you go.
7. Rinse the knife and sharpening stone with water after use.

Tips

• Use a light, even pressure when sharpening.
• Do not use the sharpening stone on serrated knives.
• Store the sharpening stone in a dry place when not in use.
• The grit size refers to the size of the diamond particles on the sharpening stone. A lower grit size (such as 80) has larger particles that can remove more metal from the blade, while a higher grit size (such as 3000) has smaller particles that can create a finer edge.
• The stones are typically made from monocrystalline diamond, which is the hardest type of diamond.
• The size of the stones will vary depending on the manufacturer, but they are typically around 6.7 inches long, 3 inches wide, and 2mmthick.
• Some sharpening stone sets come with a lifetime warranty.